Sanwa 24 mm smoke push button with clips. View from 3/4.
search
  • Sanwa 24 mm smoke push button with clips. side view.
  • Sanwa 24 mm smoke push button with clips. View from 3/4.
  • Sanwa 24 mm smoke push button with clips. Face view.
  • Sanwa 24 mm smoke push button with clips. Rear view.

Sanwa black transparent push button 24 mm

€3.85

black transparent (smoke) button from the Sanwa Denshi range.

This button can be inserted in a 24 mm hole.
Mix colors as you wish among a whole panel available.
You can also integrate a label inside to personalize it.

Sanwa Denshi OBSC button with clips, smoke transparent 24 mm.

Quantity

This transparent black push button (know as smoke color) from Sanwa features the SW-68 switch, which is known to have the precision of the best one available in the world.

Its robustness allows you to spam it over 1 million times without any problem.

This switch is equipped with a clip that allows you to attach it to the control panel of your arcade cabinet or Bartop in metal or Plexiglas of 3.9 mm maximum. However, you can also use it on thicker panels (mdf type) but you will not be able to clip it.
The pressure exerted on each side of the button by the clips will prevent the button from coming out even if it is not attached to the control panel.

You can mix colors with the whole Sanwa OBSC and OBSF 24 mm range and mix the push button part and the button base to your liking.

A common ground cable is required, as well as a connector cable is required for the button operation.

Characteristics

- Color : black translucent (smoke)
- Minimum / maximum drilling diameter: 23.9 / 24.2 mm
- Maximum thickness of the mounting plate for the use of the clip: 3.9 mm
- Switch type: SW-68
- Estimated lifetime: 1 million times
- Terminal lugs: 2.8 mm (with the option of using 4.8 mm lugs)



- Optional : 35 cm Cable with 1 x 2.8 mm lug and 1 x Dupont connector for GPIO port (Raspberry PI / Odroid / Xinmotek board)

Câble Dupont et Cosse 2.8mm

OBSC-24-CS

Data sheet

Color
Black
Smoke
Button Size
24 mm
Luminous
Non
Button shape
Convexe
With Clic
No
Translucent
Translucent
Brand
Sanwa
Metallic color
No

Specific References

24 mm ? 30 mm ? What to do ?

Be careful, don't make a mistake! There are several sizes of buttons (mainly 24, 28 and 30mm).

We talk about size of the button, but in fact it is the drilling necessary for the insertion of the button.

We will group 28 and 30mm which varies mostly depending on the brand of the button.

Whether in action games or shoot'em up for example, the buttons "foot", "fist" or shooting is in most cases 28/30mm.

The 24mm buttons are used for the options (like select and start for example).

However, on mini terminals, pincabs, as well as on Hitboxes, you can use smaller 24mm buttons.

Screw button or clip button ?

Depending on your panel, we will prefer one or the other.

For metal or plexiglass panels, clip-on buttons are preferable because they fit perfectly with the thin panel.

For wood panels, the choice will be first of all for a screw knob whose depth will depend on the thickness of your control panel.

Having said that, you should know that the buttons were originally called "push buttons".
This means that you will never pull on them, only spam on the "push" part.
Therefore, even though the clip-on buttons don't "clip" onto your wooden control panel, they will never come off.

Of course, if you've smeared glue on your fingers, or are playing with caramelized fingers, you're taking a chance of removing the button.

Otherwise it's all good!

Any questions? A doubt? Or a solution?


Please contact us!

16 other products in the same category