Crown Gunmetal Button - 30mm

€6.49

The SDB 202M is the evolution of the 201M version.
This version with gun metal colors will bring a chic side to your arcade.

The microswitch used is the fastest in the world thanks to a shorter pressure on the button.
A real technological advance for an optimal game comfort.

30mm Crown gun metal button SDB 202M with screw.

Quantity

With a gamer design, this 30mm gun metal Samducksa button is equipped with a silent micro switch, which will allow you to press it repeatedly very quickly. This is the most high-end Korean button.

Thanks to its new Cherry Linear micro switch included, the activation distance of the button is 1.2mm (the previous version was 2mm) which is a gain of 60% to increase the speed of impulse and be able to spam with all your strength.

This button has been tested to work without blinking 50 million times! A record.

Micro switch Cherry Samducksa Fonctionnement
How the Samducksa microswitch works

You can also interchange the button colors and thus allow a golden base to insert the silver push button for example.

2.8mm lugs are required for connection.

Features

- Max hole size: 30 mm
- Maximum mounting plate thickness: 14.8 mm
- Switch used: Cherry MX
- Estimated lifetime: 50 million times
- Leads required: 2.8mm (although not intended, this button also works with 4.8mm)

- Optional : 35 cm cable with a 2.8mm lug and a Dupont connector for the GPIO port (Raspberry PI / Odroid / Xinmotek card)

Câble Dupont et Cosse 2.8mm

Reference SDB-202M-30-MG

Data sheet

Color: Gun Metal
Button Size: 30 mm
Maximum thickness of the control panel: 11 mm
Luminous: Non
Button shape: Convexe
With Clic: No
Translucent: Non translucent
Brand: Samducksa
Metallic color: Yes

Specific References

24 mm ? 30 mm ? What to do ?

Be careful, don't make a mistake! There are several sizes of buttons (mainly 24, 28 and 30mm).

We talk about size of the button, but in fact it is the drilling necessary for the insertion of the button.

We will group 28 and 30mm which varies mostly depending on the brand of the button.

Whether in action games or shoot'em up for example, the buttons "foot", "fist" or shooting is in most cases 28/30mm.

The 24mm buttons are used for the options (like select and start for example).

However, on mini terminals, pincabs, as well as on Hitboxes, you can use smaller 24mm buttons.

Screw button or clip button ?

Depending on your panel, we will prefer one or the other.

For metal or plexiglass panels, clip-on buttons are preferable because they fit perfectly with the thin panel.

For wood panels, the choice will be first of all for a screw knob whose depth will depend on the thickness of your control panel.

Having said that, you should know that the buttons were originally called "push buttons".
This means that you will never pull on them, only spam on the "push" part.
Therefore, even though the clip-on buttons don't "clip" onto your wooden control panel, they will never come off.

Of course, if you've smeared glue on your fingers, or are playing with caramelized fingers, you're taking a chance of removing the button.

Otherwise it's all good!

Any questions? A doubt? Or a solution?

Please contact us!