There are no more items in your cart
Cart
0
Item(s)
warp zone
Standard button 30mm with clips
€1.49
Standard 30mm click button.
Select your color and enjoy your archway without breaking the bank.
Standard 30mm click arcade button.
30mm clip and click button.
Select the color from 7 to choose from (Blue, yellow, black, pink, red, green and white).
Despite its low cost, this button will not disappoint you. The click each time you use it is quite smooth and effectively activates the microswitch that is essential for pressing your action buttons.
This button is ideal for casual gamers who want to build their own arcade. Unbeatable quality-price ratio.
Microswitch 2 lugs 2.8mm. Pressure system for click button.
A common ground chain, connected to ground with the other buttons, is required for the button to work properly.You can mix colors as you like with other Sanwa buttons of the same size.
Features:
- Max. hole size: 30 mm
- Maximum mounting plate thickness: 3.5mm
- Switch used: Biolan A34
- Estimated lifetime: 500000 times
- Lugs needed: 2.8 mm (although not planned, this button also works with 4.8 mm)
- Optional: 35 cm cable with a 2.8mm lug and a Dupont connector for the GPIO port (Raspberry PI / Odroid / Xinmotek card)
PU-026R
Data sheet
- Color
- Black
Blue
Green
Pink
Red
Yellow - Button Size
- 30 mm
- Luminous
- Non
- Button shape
- Convexe
- With Clic
- Yes
- Brand
- Générique
- Metallic color
- No
Specific References
24 mm ? 30 mm ? What to do ?
Be careful, don't make a mistake! There are several sizes of buttons (mainly 24, 28 and 30mm).
We talk about size of the button, but in fact it is the drilling necessary for the insertion of the button.
We will group 28 and 30mm which varies mostly depending on the brand of the button.
Whether in action games or shoot'em up for example, the buttons "foot", "fist" or shooting is in most cases 28/30mm.
The 24mm buttons are used for the options (like select and start for example).
However, on mini terminals, pincabs, as well as on Hitboxes, you can use smaller 24mm buttons.
Screw button or clip button ?
Depending on your panel, we will prefer one or the other.
For metal or plexiglass panels, clip-on buttons are preferable because they fit perfectly with the thin panel.
For wood panels, the choice will be first of all for a screw knob whose depth will depend on the thickness of your control panel.
Having said that, you should know that the buttons were originally called "push buttons".
This means that you will never pull on them, only spam on the "push" part.
Therefore, even though the clip-on buttons don't "clip" onto your wooden control panel, they will never come off.
Of course, if you've smeared glue on your fingers, or are playing with caramelized fingers, you're taking a chance of removing the button.
Otherwise it's all good!
Any questions? A doubt? Or a solution?
Please contact us!
16 other products in the same category
Standard 30mm click button.
Select your color and enjoy your archway without breaking the bank.