Luminous button 28mm

€1.95

2 to 3 weeks delay

Generic green transparent button 30 mm All In One.
Silent button (without click) that does not demerit

Perfect for the occasional player, it will allow you to build, or renovate your arcade cabinetat a lower cost.

Green arcade button 30mm with clips.

Color

White
Red
Blue
Green
Yellow

Quantity

Please allow 2 to 3 weeks for delivery of this button

Luminous screw button without click for arcade, bartop or hitbox.
It is perfect for all arcade or bartop terminals (wood, plexiglass or metal).

A slight pressure will activate the integrated micro switch. The led light stays on.

It is possible to stick or print a sticker inside to personalize your button.
A common ground chain, connected to the ground with the other buttons, is necessary for the proper functioning of the button.
For the button to light up you will also need a cable chain, connected to all the other led buttons.

You can mix the colors as you like with the other HX reference buttons of the same size.

This wide range of buttons will allow you to choose a harmonious design, without compromising on quality or performance.

The screw, led and micro switch are included in the button. All you have to do is plug it in.

Features :

- Max hole size: 28 mm
- Maximum mounting plate thickness: 20 mm
- Estimated lifetime : 500 000 times
- Lugs needed: 2.8 mm (although not planned, this button also works with 4.8mm)
- Leads required: 2.8mm (also works with 4.8mm).
- Available colors: green, yellow, white, red, blue

- Optional: 35 cm cable with a 2.8mm lug and a Dupont connector for the GPIO port (Raspberry PI / Odroid / Xinmotek card)

Câble Dupont et Cosse 2.8mm

Reference HX-PU023

Data sheet

Color: Blue
Green
Button Size: 28 mm
Maximum thickness of the control panel: 20 mm
Luminous: Oui
Button shape: Convexe
With Clic: No
Translucent: Translucent
Brand: Générique
Metallic color: No

Specific References

24 mm ? 30 mm ? What to do ?

Be careful, don't make a mistake! There are several sizes of buttons (mainly 24, 28 and 30mm).

We talk about size of the button, but in fact it is the drilling necessary for the insertion of the button.

We will group 28 and 30mm which varies mostly depending on the brand of the button.

Whether in action games or shoot'em up for example, the buttons "foot", "fist" or shooting is in most cases 28/30mm.

The 24mm buttons are used for the options (like select and start for example).

However, on mini terminals, pincabs, as well as on Hitboxes, you can use smaller 24mm buttons.

Screw button or clip button ?

Depending on your panel, we will prefer one or the other.

For metal or plexiglass panels, clip-on buttons are preferable because they fit perfectly with the thin panel.

For wood panels, the choice will be first of all for a screw knob whose depth will depend on the thickness of your control panel.

Having said that, you should know that the buttons were originally called "push buttons".
This means that you will never pull on them, only spam on the "push" part.
Therefore, even though the clip-on buttons don't "clip" onto your wooden control panel, they will never come off.

Of course, if you've smeared glue on your fingers, or are playing with caramelized fingers, you're taking a chance of removing the button.

Otherwise it's all good!

Any questions? A doubt? Or a solution?

Please contact us!