Sanwa 30 mm button. Orange color, 3/4 view.
search
  • Sanwa 30 mm button. Orange color, 3/4 view.
  • Sanwa 30 mm button. Orange color, side view.
  • Sanwa 30 mm button. Orange color, front view.
  • Sanwa 30 mm button. Orange color, rear view.

Orange Sanwa Button 30 mm

€2.50

Push button 30 mm from Sanwa brand, orange color.
Clip on button, ideal for a metal or plexiglass control panel.

Button Sanwa Denshi, OBSF-LB, 30 mm, color : Orange.

Quantity

Orange Sanwa brand 30 mm clip-on button. Perfect for an arcade or bartop with a plexiglass or metal control panel.

This button integrates the SW-68 microswitch known for its excellent performance.
Thanks to its performance, its quality and its aesthetics, this button allows you to concentrate on the essential: The game!
It gives you an exceptional grip and a smooth feel.

A common ground chain, connected to the ground with the other buttons, is necessary for the proper functioning of the button. You can mix the colors as you like with the other Sanwa buttons of the same size.

Features:

- Max hole size: 30 mm
- Maximum mounting plate thickness: 3.7 mm
- Switch used: SW-68
- Estimated lifetime: 1 million times
- Leads required: 2.8mm (although not intended, this switch will also work with 4.8mm)


- Optional : Common ground chain with 16 lugs 2.8 mm, 4 lugs 4.8 and 1 Dupont connector to connect to the ground of a GPIO port.

CHaine de masse commune GPIO

- Optional : 35 cm cable with a 2.8mm lug and a Dupont connector for the GPIO port (Raspberry PI / Odroid / Xinmotek card)

Câble Dupont et Cosse 2.8mm

OBSF-30-O

Data sheet

Color
Orange
Button Size
30 mm
Maximum thickness of the control panel
3 mm
Luminous
Non
Button shape
Convexe
With Clic
No
Translucent
Non translucent
Brand
Sanwa
Metallic color
No

Specific References

24 mm ? 30 mm ? What to do ?

Be careful, don't make a mistake! There are several sizes of buttons (mainly 24, 28 and 30mm).

We talk about size of the button, but in fact it is the drilling necessary for the insertion of the button.

We will group 28 and 30mm which varies mostly depending on the brand of the button.

Whether in action games or shoot'em up for example, the buttons "foot", "fist" or shooting is in most cases 28/30mm.

The 24mm buttons are used for the options (like select and start for example).

However, on mini terminals, pincabs, as well as on Hitboxes, you can use smaller 24mm buttons.

Screw button or clip button ?

Depending on your panel, we will prefer one or the other.

For metal or plexiglass panels, clip-on buttons are preferable because they fit perfectly with the thin panel.

For wood panels, the choice will be first of all for a screw knob whose depth will depend on the thickness of your control panel.

Having said that, you should know that the buttons were originally called "push buttons".
This means that you will never pull on them, only spam on the "push" part.
Therefore, even though the clip-on buttons don't "clip" onto your wooden control panel, they will never come off.

Of course, if you've smeared glue on your fingers, or are playing with caramelized fingers, you're taking a chance of removing the button.

Otherwise it's all good!

Any questions? A doubt? Or a solution?


Please contact us!