Bouton lumineux contour noir - 30mm

€2.00

Luminous button black base with 30mm screw.

Select the color of your button and your led bulb and create the surprise by lighting your arcade terminal.

Button light led screw base 30mm black outline.

Color

White
Red
Blue
Green
Yellow

Quantity

Generic 30mm lighted screw-in button for any type of control panel (wood, metal etc.).

Select the color of your button and the light emitted by it. If you choose a white button, you can choose the color when you turn it on by adapting the bulb.

This way you can create a surprise when you turn on your arcade.

This button is suitable for all purposes: action button or select / start / hotkey etc. This button is clickable. If you want a quieter button, it is better to go for "All In One" buttons without click.

You can integrate the use you want to make of each button. We invite you to use transparent paper so that the light of the led is not darkened by the opacity of a classic paper.

You must connect the button to your system so that it can work.
For this you will need a ground cable and a connector cable.

For the led to work you will need to connect the button to a power system (USB, Zero Delay card with led, AC adapter etc.)

Characteristics.

- Micro switch used: G5T16 (200000 uses)
- Number of decibels at 30 cm standard use: 63 db (74 db at high use).
- Available colors : White, blue, red, green and yellow.
- Double tightening screw.
- Leds lugs : 6.3mm
- Micro switch lugs : 4.8mm
- Led bulb 5/12V

Optional :

35 cm cable with 4.8mm lug and Dupont connector (Raspberry, Xinmotek card etc.).

Reference HX-PU021-KY

Data sheet

Color: Blue
Green
Red
White
Yellow
Button Size: 30 mm
Maximum thickness of the control panel: 20 mm
Luminous: Oui
With Clic: Yes
Translucent: Non translucent
Brand: Générique
Metallic color: No
Connector: 6.3mm

Specific References

24 mm ? 30 mm ? What to do ?

Be careful, don't make a mistake! There are several sizes of buttons (mainly 24, 28 and 30mm).

We talk about size of the button, but in fact it is the drilling necessary for the insertion of the button.

We will group 28 and 30mm which varies mostly depending on the brand of the button.

Whether in action games or shoot'em up for example, the buttons "foot", "fist" or shooting is in most cases 28/30mm.

The 24mm buttons are used for the options (like select and start for example).

However, on mini terminals, pincabs, as well as on Hitboxes, you can use smaller 24mm buttons.

Screw button or clip button ?

Depending on your panel, we will prefer one or the other.

For metal or plexiglass panels, clip-on buttons are preferable because they fit perfectly with the thin panel.

For wood panels, the choice will be first of all for a screw knob whose depth will depend on the thickness of your control panel.

Having said that, you should know that the buttons were originally called "push buttons".
This means that you will never pull on them, only spam on the "push" part.
Therefore, even though the clip-on buttons don't "clip" onto your wooden control panel, they will never come off.

Of course, if you've smeared glue on your fingers, or are playing with caramelized fingers, you're taking a chance of removing the button.

Otherwise it's all good!

Any questions? A doubt? Or a solution?

Please contact us!