Sanwa stealth button 30 mm clip white

€3.79

Sanwa 30mm white stealth clip button.

This button has no design differences from the "classic" OBSF buttons.
This one differs by a slightly different design, which results in an extremely quiet button.

Sanwa silent button OBSFE 30mm with clips white.

Quantity

Compared to standard Sanwa white buttons, the OBSFE silent button has an integrated switch and push section, which reduces the high impact noise when pressing the button.

This OBSFE button is just as pleasant to use, however, there is a very slight difference in use, as it is a bit harder to push.

This is due to the fact that this button integrates an elastic type membrane under the cap. The friction is therefore slightly more important.

But beware, you will still have a slight sound when using it, it is not totally without noise.

This button uses the same microswitch (SW-68) as the other buttons: What a pleasure to play!

A connector cable and a common ground chain, connected to the ground with the other buttons, are necessary for the proper functioning of the button.
As the push button of this version is different from the others, you can only mix the colors with the other Sanwa OBSFE buttons of the same size.

Features :

- Max hole size: 30 mm (±0.1mm)
- Maximum mounting plate thickness: 3.7 mm
- Switch used: SW-68
- Estimated lifetime: 1 million times
- Leads required: 2.8mm (although not intended, this switch will also work with 4.8mm)

- Optional : 35 cm cable with a 2.8mm lug and a Dupont connector for the GPIO port (Raspberry PI / Odroid / Xinmotek card)

Câble Dupont et Cosse 2.8mm

Reference OBSFE-30-W

Data sheet

Color: White
Button Size: 30 mm
Luminous: Non
Button shape: Convexe
With Clic: No
Translucent: Non translucent
Brand: Sanwa

Specific References

24 mm ? 30 mm ? What to do ?

Be careful, don't make a mistake! There are several sizes of buttons (mainly 24, 28 and 30mm).

We talk about size of the button, but in fact it is the drilling necessary for the insertion of the button.

We will group 28 and 30mm which varies mostly depending on the brand of the button.

Whether in action games or shoot'em up for example, the buttons "foot", "fist" or shooting is in most cases 28/30mm.

The 24mm buttons are used for the options (like select and start for example).

However, on mini terminals, pincabs, as well as on Hitboxes, you can use smaller 24mm buttons.

Screw button or clip button ?

Depending on your panel, we will prefer one or the other.

For metal or plexiglass panels, clip-on buttons are preferable because they fit perfectly with the thin panel.

For wood panels, the choice will be first of all for a screw knob whose depth will depend on the thickness of your control panel.

Having said that, you should know that the buttons were originally called "push buttons".
This means that you will never pull on them, only spam on the "push" part.
Therefore, even though the clip-on buttons don't "clip" onto your wooden control panel, they will never come off.

Of course, if you've smeared glue on your fingers, or are playing with caramelized fingers, you're taking a chance of removing the button.

Otherwise it's all good!

Any questions? A doubt? Or a solution?

Please contact us!