Sanwa yellow triangle button

€4.49

The OBSF-24-KK triangle button, yellow.
It is a button that contains the same switch (SW-68) as the other more classic buttons of the Sanwa brand.

Yellow triangle button OBSF-24TR from Sanwa

Quantity

Button designed for a metal or plexiglass control panel (2,9 mm max).

You want to create a Zelda terminal for example? This button could be used as a triforce and support the design of your bartop or arcade cabinet.

Just like its round buttons, Sanwa equips its triangular buttons with its high-end micro switch: SW-68.

It is therefore given to be used 1 million times.

Feel free to download the manual with all the technical information in the dedicated section.

This switch requires a common ground cable (connected to the earth) as well as a cable to connect to your system (not included).
The required lugs are 2.8mm. However, 4.8mm lugs will work just fine.

This button requires a hole with 15mm sides.

You can use this button on a deeper panel, however, the clip for holding the button will not be active.

The colors available for this Sanwa triangle button are:

- Red
- Yellow
- green
- Blue

- Optional: Cable with 1 lug 2.8mm and 1 Dupont connector for GPIO port (Raspberry PI / Odroid / Xinmotek card)

Reference OBSF-24TR-Y

Data sheet

Color: Yellow
Luminous: Non
Button shape: Flat
With Clic: No
Translucent: Non translucent
Brand: Sanwa
Metallic color: No
Shape: triangle

Specific References

Download

Notice triangle Sanwa

Notice des boutons Sanwa ayant pour référence OBSF-24TR

Download (4.28MB)

24 mm ? 30 mm ? What to do ?

Be careful, don't make a mistake! There are several sizes of buttons (mainly 24, 28 and 30mm).

We talk about size of the button, but in fact it is the drilling necessary for the insertion of the button.

We will group 28 and 30mm which varies mostly depending on the brand of the button.

Whether in action games or shoot'em up for example, the buttons "foot", "fist" or shooting is in most cases 28/30mm.

The 24mm buttons are used for the options (like select and start for example).

However, on mini terminals, pincabs, as well as on Hitboxes, you can use smaller 24mm buttons.

Screw button or clip button ?

Depending on your panel, we will prefer one or the other.

For metal or plexiglass panels, clip-on buttons are preferable because they fit perfectly with the thin panel.

For wood panels, the choice will be first of all for a screw knob whose depth will depend on the thickness of your control panel.

Having said that, you should know that the buttons were originally called "push buttons".
This means that you will never pull on them, only spam on the "push" part.
Therefore, even though the clip-on buttons don't "clip" onto your wooden control panel, they will never come off.

Of course, if you've smeared glue on your fingers, or are playing with caramelized fingers, you're taking a chance of removing the button.

Otherwise it's all good!

Any questions? A doubt? Or a solution?

Please contact us!