There are no more items in your cart
Cart
0
Item(s)
warp zone
Sanwa button 18 mm red or white
€2.00
Sanwa 18 mm red button.
It is mainly used for the ignition or hotkey of your arcade machine.
Small red or white SDM-18R button Sanwa.
Small red or white Sanwa button. Its small size (18 mm) makes it a perfect ally for mini arcade cabinets.
It can also be used as a service button on the back, for example to turn on your arcade cabinet or bartop.
Depending on its location, it can be used as a "Start" or "Select" button or as a "Hotkey".
The wings on each side of the button allow the button to be held in the hole provided, whatever the depth of your cabinet.
However, for the button to be "locked" the mounting plate must be between 0.5 and 2.0 mm.
In case you want to use this button in a cabinet or bartop with a thick wood panel, it is better to wire the button through the hole before inserting it.
For use, you must connect it to earth via a common ground chain. It is also necessary to connect it to your system with a dedicated cable.
- Optional: 35 cm cable with 1 x 2.8mm lug and 1 x Dupont connector for GPIO port (Raspberry PI / Odroid / Xinmotek card etc.)
This button is available in white and red only.
SDM-18-R
Data sheet
- Color
- Red
- Button Size
- 18 mm
- Luminous
- Non
- Button shape
- Concave
- With Clic
- No
- Translucent
- Non translucent
- Brand
- Sanwa
- Metallic color
- No
- Shape
- Round
Specific References
24 mm ? 30 mm ? What to do ?
Be careful, don't make a mistake! There are several sizes of buttons (mainly 24, 28 and 30mm).
We talk about size of the button, but in fact it is the drilling necessary for the insertion of the button.
We will group 28 and 30mm which varies mostly depending on the brand of the button.
Whether in action games or shoot'em up for example, the buttons "foot", "fist" or shooting is in most cases 28/30mm.
The 24mm buttons are used for the options (like select and start for example).
However, on mini terminals, pincabs, as well as on Hitboxes, you can use smaller 24mm buttons.
Screw button or clip button ?
Depending on your panel, we will prefer one or the other.
For metal or plexiglass panels, clip-on buttons are preferable because they fit perfectly with the thin panel.
For wood panels, the choice will be first of all for a screw knob whose depth will depend on the thickness of your control panel.
Having said that, you should know that the buttons were originally called "push buttons".
This means that you will never pull on them, only spam on the "push" part.
Therefore, even though the clip-on buttons don't "clip" onto your wooden control panel, they will never come off.
Of course, if you've smeared glue on your fingers, or are playing with caramelized fingers, you're taking a chance of removing the button.
Otherwise it's all good!
Any questions? A doubt? Or a solution?
Please contact us!
16 other products in the same category
Sanwa 18 mm red button.
It is mainly used for the ignition or hotkey of your arcade machine.