Sanwa 20 mm button with clip, green color. 3/4 view.
search
  • Sanwa 20 mm button with clip, green color. 3/4 view.
  • Sanwa 20 mm button with clip, green color. side view.
  • Sanwa 20 mm button with clip, green color. Front view.
  • Sanwa 20 mm button with clip. back view.

Sanwa Button - 20 mm

€2.20

Small 20mm Sanwa button that can be used as a service button to turn on or off your arcade or Bartop.
It can also be used as a Hotkey, Start or Select button.

Sanwa 20 mm button, blue, red, yellow or green.

Color
Quantity

This small SDM button from Sanwa cannot be used as an action button.
The type of switch used requires a strong pressure on the button to be activated.

That's why it's better to use it as a service button, Hotkey, Start or Select button.

Unlike the 18 mm button, this one contains a clip identical to those present in the OBSF and OBSC models. The depth of the control panel to activate the clip must be between 0.5 mm and 2 mm. In other cases, the button will hold, but the clip will not be activated. If you pull the button it will come off.

This button works like all the others of the brand, it is necessary to include a ground cable and a cable dedicated to its function.

You can find the cables necessary for its use in the options.

The colors available are: red, green, blue, yellow.

For more technical information on the button, we invite you to download the document in the tab dedicated to the Sanwa SDM button.

- In option : 35 cm cable with 1 2.8mm terminal and a Dupont connector for the GPIO port (Raspberry PI / Odroid / Xinmotek card etc.). Possibility to order 2 of them.

Câble Dupont et Cosse 2.8mm

SDM-20

Data sheet

Color
Blue
Green
Red
Yellow
Button Size
20 mm
Luminous
Non
Button shape
Concave
With Clic
No
Translucent
Non translucent
Brand
Sanwa
Metallic color
No

Specific References

Download

Bouton Sanwa 20 mm

Schéma du bouton Sanwa 20 mm

Download (1.98MB)

24 mm ? 30 mm ? What to do ?

Be careful, don't make a mistake! There are several sizes of buttons (mainly 24, 28 and 30mm).

We talk about size of the button, but in fact it is the drilling necessary for the insertion of the button.

We will group 28 and 30mm which varies mostly depending on the brand of the button.

Whether in action games or shoot'em up for example, the buttons "foot", "fist" or shooting is in most cases 28/30mm.

The 24mm buttons are used for the options (like select and start for example).

However, on mini terminals, pincabs, as well as on Hitboxes, you can use smaller 24mm buttons.

Screw button or clip button ?

Depending on your panel, we will prefer one or the other.

For metal or plexiglass panels, clip-on buttons are preferable because they fit perfectly with the thin panel.

For wood panels, the choice will be first of all for a screw knob whose depth will depend on the thickness of your control panel.

Having said that, you should know that the buttons were originally called "push buttons".
This means that you will never pull on them, only spam on the "push" part.
Therefore, even though the clip-on buttons don't "clip" onto your wooden control panel, they will never come off.

Of course, if you've smeared glue on your fingers, or are playing with caramelized fingers, you're taking a chance of removing the button.

Otherwise it's all good!

Any questions? A doubt? Or a solution?


Please contact us!

16 other products in the same category