Large 60mm illuminated button

€3.95

Large 60mm diameter illuminated button.

Perfect for a start button or to light up your arcade or bartop.

Large 60 mm LED light button.

Color

White
Red
Blue
Green
Yellow

Quantity

LED power cable chain 5/12V...

€2.49

Common ground chain 2.8 and...

€4.90

Cable with Dupont Connector

€0.50

With this large 60mm-diameter illuminated button, you can add a unique design to your arcade cabinet.

Choose the color of your button and LED. Create a surprise when you light up your arcade or bartop.

As this luminous button is click-activated, it's best not to use it as an action button.
It's perfect for use as a Start, Select or Hotkey button.

This button is supplied with the following items:

- Button to be selected from the following colors: blue, green, red, white and yellow
- Micro-switch,
- A Wedge-type LED bulb (to be selected in the case of a white button): Blue, green, red, white and yellow
- Screw-fastening bracket for tightening and covering.

This button fits into a hole 26 to 28mm in diameter, with a maximum thickness of 18mm.

The female lugs required to light the LED must be 6.3mm.
For microswitch operation, female lugs must be 4.8mm.

Reference HXPU007-R

Data sheet

Color: Blue
Green
Red
White
Yellow
Maximum thickness of the control panel: 18 mm
Luminous: Oui
Button shape: Flat
With Clic: Yes
Brand: Générique
Metallic color: No
Shape: Round
Connector: 4.8mm
6.3mm

Specific References

24 mm ? 30 mm ? What to do ?

Be careful, don't make a mistake! There are several sizes of buttons (mainly 24, 28 and 30mm).

We talk about size of the button, but in fact it is the drilling necessary for the insertion of the button.

We will group 28 and 30mm which varies mostly depending on the brand of the button.

Whether in action games or shoot'em up for example, the buttons "foot", "fist" or shooting is in most cases 28/30mm.

The 24mm buttons are used for the options (like select and start for example).

However, on mini terminals, pincabs, as well as on Hitboxes, you can use smaller 24mm buttons.

Screw button or clip button ?

Depending on your panel, we will prefer one or the other.

For metal or plexiglass panels, clip-on buttons are preferable because they fit perfectly with the thin panel.

For wood panels, the choice will be first of all for a screw knob whose depth will depend on the thickness of your control panel.

Having said that, you should know that the buttons were originally called "push buttons".
This means that you will never pull on them, only spam on the "push" part.
Therefore, even though the clip-on buttons don't "clip" onto your wooden control panel, they will never come off.

Of course, if you've smeared glue on your fingers, or are playing with caramelized fingers, you're taking a chance of removing the button.

Otherwise it's all good!

Any questions? A doubt? Or a solution?

Please contact us!